產品規格書 Technical Data Sheet (TDS) | ||||||
產品編號Product Code |
X236-2 | 產品描述Product Description | 25#半啞PI /溶劑膠/80g白色格拉辛 25# semi-gloss white PI/Solvent adhesive/80g white glassine | |||
面材Surface Material | 底紙Release Liner | |||||
材料描述Material Description |
PI | 材料描述Material Description |
80克格拉辛底紙 80g glassine release linear | |||
厚度(um) Thickness | 45±5 | 厚度(um) Thickness | 70±5 | |||
克重(g/㎡) Weight | 76±5 | 克重(g/㎡) Weight | 80±5 | |||
顏色 Color | 半啞 Semi-gloss white | 顏色 Color | 白色 White | |||
打印性能 | 使用優質全樹脂碳帶，桌面打印機打印能級12-14，打印清晰，工業打印機適當調整對應能級 | |||||
膠水Adhesive | ||||||
項目 Test Item | 典型值 Typical Data | 單位 Unit | 測試方法 Test Methods | |||
膠水類型 Adhesive | 可移膠 Removeable Solvent | / | / | |||
厚度 Thickness | 25±3 | um | / | |||
粘著力 Adhesion | 400±100 | gf/25mm | FTM1 | |||
環形初粘力 Loop Tack | 500.0 | gf/25mm | FTM9 | |||
持粘力 Holding Force | ≥24 | H | FTM8 | |||
最低貼標溫度 Lowest Paste Temperature |
10 |
℃ | / | |||
使用溫度Application Temperature |
—40~300 |
℃ | / | |||
使用建議Suggest Applications | 1. 材料適合適合凸版，柔版，絲網印刷等各種印刷方式。Suitable for every printing methods. 2. 適合TTR打印模式，推薦使用全樹脂碳帶。 Suitable for TTR printing model, suggest print with resin ribbon. 3. 表面經過特殊處理，具備優異的印刷與打印性能，且圖像耐酒精與汽油等溶劑能力強； With special surface, have high printing performance and excellent anti-solvent. 4. 廣泛應用于耐高溫條碼打印追溯標識。 Widely used in High-Temperature Barcode Printing tracing Identification. | |||||
儲存條件Store Condition | 在溫度23±2℃和50±5%RH相對濕度情況下，室內，通風，避免高溫高濕和陽光直射，可存儲一年。 Keep indoor, aeration. Avoid high humidity and direct sunlight. Keep one year in 23±2℃ and 50±5%RH humidity. | |||||
備注Note |
申明: 以上所有的描述及數據基于安德公司對產品及原料的測試結果及應用經驗，并未形成對產品出售后應用環境的擔保，客戶需要在實際的應用環境下進行測試，以評估該產品是否符合使用環境的要求，安德公司在本公司質量標準及相應國家法規下承擔產品質量責任。 Disclaimer: all of above description and data are based on the Antac's testing results and application experience of products and raw materials, not on the guarantee of application environment after products are saled. Customers need to test in actual application environment, to assess whether the products are conformed to requirements. Antac is responsible for quality in standard company quality and corresponding national regulations. | |||||
文件類型：pdf 大小： 553KB 下載： 次
